Pure Water ULTIMA 888 Installation Manual download pdf (Page 4)

Operating Parameters . . . .

The ULTIMA 888 unit has been designed to function within specific environmental parameters.

Operation outside of these parameters will nullify any design or manufacturing warranties.

• Feedwater Requirements (for automatic operation):

a. Treated municipal drinking water. If suspended solids are present, a sediment filter

must be used before the mini-softener.

b. Minimum pressure is 20 PSI.

c. Maximum pressure is 100 PSI.

• Ambient air/surface temperatures operating range is 50°-90° F (10°-32° C).

• The ULTIMA 888 is not designed for the outdoor environment nor exposure to direct sunlight.

Suitable Location for Installation . . . .

The location where the ULTIMA 888 is placed in an office or home is very important. Several

factors must be considered:

1. Plumbing. When possible, the unit should be placed near plumbing lines, we recommend all

units should be plumbed in, if possible, to provide the most convenience for the customer.

2. Warm Air/Noise. The ULTIMA 888 system produces two by-products when operating — warm

air, and some low-level noise. When possible, the system should be located away from desks

or work stations. However, the unit may be equipped with an optional timer to control the

operation schedule of the system. With the timer, the unit may be set to operate during non-

office hours or at night.

Note: This will be true only for small offices. Where a large number of people are served by

one unit, the unit may need to be operated on demand and without the timer being engaged.

3. Environmental-Vandalism. In applications where vandalism may be a problem, do not place

the unit in an uncontrolled or hostile environment. However, the following precautions may be

taken to prevent any misfortune.

• Utilize a lock-in cap. Two holes may be drilled into the top cap through which plastic

pins are inserted to prevent unwanted cap removal.

• Place lock-in protectors on fittings to prevent unwanted disconnection of tubing.

• Use torx-type bolts on dispenser attachment brackets.

Page 4

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Pure Water ULTIMA 888 Installation Manual Page 4